MANUAL D-LINK DWL-2100AP PDF
DWLAP. b/g Access Point. Command Line Interface Reference Manual. First Edition (January ). RECYCLABLE. Step 1 Open your web browser such as Internet Explorer and enter the IP address of the DWLAP in the Address bar and press Enter. The default IP. Access Point Mode The DWLAP is set to Access Point (AP) mode by default , which allows the DWLAP to connect to wireless clients.
|Published (Last):||5 December 2004|
|PDF File Size:||18.17 Mb|
|ePub File Size:||2.56 Mb|
|Price:||Free* [*Free Regsitration Required]|
If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.
Allows you to select a channel. Open a web browser and type the IP address of the access point in the address bar default is This window will appear: System Log The log information will include, but not limited to, the following items: With AP Manager there is no need to configure devices individually.
D-link DWL-2100AP Install Manual
You can change the user name and password within the web-based configuration utility that is built-in to the access point. Click OK after you have selected the settings file. If they are not, wireless connection will not be established. To upgrade the firmware: X-link Panel Pressing this button restores the Access Point to its original factory default settings. There are three types: Page 74 To load a previously saved configuration file, follow these steps: See the Appendix if you need assistance in assigning a Static IP address for your network adapter.
You also have the option of connecting the DWLAP directly to the computer that will be used for configuration. Don’t show me this message again. A lower interval may reduce transfer data rate.
Table of Contents Add to my manuals Add. All computers on your network should have the same Workgroup name. How to fix slow webpage load speeds on DIRL when used with some mobile devices? Got it, continue to print.
D-Link Technical Support
Select Disabled to disable the filters function. An example of a domain name is: To load a previously saved configuration file, follow these steps: Got it, continue to print. Reject — Allows all clients except for what you enter in the list. The device configuration window allows you to configure settings but does not actually apply the settings to the device unless you click the Apply button.
Insert a disk into the Floppy Disk Drive, in this case drive A. Don’t show me this message again.
Power Receptor Used to connect the supplied power adapter. Auto Channel Select Enable or Disable.
D-link DWL-2100AP Manual
This window displays the statistics of the IEEE Allows you to enable or disable the broadcasting of the SSID to network clients. A window similar to this one will appear.
To continue click Next. In the window below, select the option that fits your needs. Other trademarks ewl-2100ap the property of their respective owners.
You can also save and load configuration files from this window. By pressing ‘print’ button you will print only current page. Click on any item in the Help screen for more information.
Step 3 Click on the Advanced tab and then click Encryption on the left d-linj. However, wireless clients will still be able to transmit across Ethernet for browsing, etc. Access Point Mode Wireless Band: Please click on the appropriate button at the bottom of each screen after you have made a configuration change. Pressing this button restores the Access Point to its original factory default settings.
Table of Contents Add to my manuals Add. Locate the file and click Open.